How to Use an Air Scrubber
An air scrubber cleans indoor air by pulling it through filters that trap dust, mold spores, and other particles. To use one effectively, place it in the room you want to treat, turn it on, and let it run until the air is clear. This guide covers setup, daily operation, and maintenance so you get the best results.
More from this site
Keep reading the latest coverage
Choosing the Right Location
Place the air scrubber in the center of the room or near the source of contamination. Keep it at least a few feet from walls and furniture so air can flow freely. For renovations, position it close to the work area to capture dust before it spreads.
Operating the Unit
Turn the air scrubber on and set the fan speed based on your needs. Higher speeds clean air faster but use more energy and make more noise. Run the unit continuously during work, and keep doors and windows closed to prevent unfiltered air from entering.
Filter Maintenance
Check the filters regularly. Pre-filters catch large debris and should be cleaned or replaced when dirty. HEPA filters trap fine particles and typically last several months depending on use. Replace them when they appear clogged or when the unit indicates it is time.
When to Use an Air Scrubber
Use an air scrubber during renovations, after water damage, or when mold is present. They also help during allergy season or in workshops with airborne particles. For daily use, run the unit in rooms where people spend the most time.
Safety Tips
- Ensure the unit is plugged into a grounded outlet.
- Do not block the intake or exhaust vents.
- Turn off the unit before cleaning or changing filters.
- Keep the area around the scrubber clear of clutter.